Navigation

index
next |
previous |
barebox 2024.03.0 documentation »
3. Command reference »
3.9.14. gpio_set_value - set a GPIO’s output value

3.9.14. gpio_set_value - set a GPIO’s output value¶

3.9.14.1. Usage¶

gpio_set_value [-d CONTROLLER] GPIO VALUE

Table of Contents

3.9.14. gpio_set_value - set a GPIO’s output value
- 3.9.14.1. Usage

Previous topic

3.9.13. gpio_get_value - return value of a GPIO pin

Next topic

3.9.15. hab - Handle i.MX HAB

This Page

Show Source

Quick search

Navigation

index
next |
previous |
barebox 2024.03.0 documentation »
3. Command reference »
3.9.14. gpio_set_value - set a GPIO’s output value

© Copyright 2014, The barebox project. Created using Sphinx 5.3.0.