4.10.4.11. Phytec phyCORE-i.MX31 CPU module PCM-037¶
4.10.4.11.1. The CPU module¶
http://www.phytec.eu/europe/products/modules-overview/phycore/produktdetails/p/phycore-imx31-2.html
This CPU card is based on a Freescale i.MX31 CPU. The card in configuration -0000REU is shipped with:
- 128 MiB synchronous dynamic RAM (DDR type)
- 64 MiB NAND flash
- 32 MiB NOR flash
- 512 kiB SRAM
- 4kiB EEPROM
- MMU, FPU
- Serial, Ethernet, USB (OTG), I2C, SPI, MMC/SD/SDIO, PCMCIA/CF, RTC
4.10.4.11.2. Supported baseboards¶
- Supported baseboards are:
- Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001
4.10.4.11.3. How to get barebox for ‘Phytec’s phyCORE-i.MX31’¶
Using the default configuration:
make ARCH=arm pcm037_defconfig
Build the binary image:
make ARCH=arm CROSS_COMPILE=armv5compiler
- NOTE: replace ‘’armv5compiler’’ with your ARM v5 cross compiler,
- e.g.: ‘’arm-1136jfs-linux-gnueabi-‘’
The resulting binary image to be flashed will be barebox.bin, whereas
the file named just barebox is an ELF executable for ARM.
