4.4. Broadcom BCM2835¶
4.4.1. Raspberry Pi¶
- Prepare a card with a FAT filesystem. Download a tiny NOOBS LITE zip archive and unpack it into FAT partition. See http://www.raspberrypi.org/help/noobs-setup/ for details.
- Compile
barebox.bin
image (userpi_defconfig
). Copy it to the SD/microSD card and name itrecovery.img
.- Connect to board’s UART (115200 8N1); Use PIN6 (GND), PIN8 (UART_TX), PIN10 (UART_RX) pins.
- Turn board’s power on.