4. Board support

• 4.1. Aarch64
  • 4.1.1. Aarch64 Qemu virt
• 4.2. Texas Instruments AM335x
  • 4.2.1. Building barebox
  • 4.2.2. Starting and updating barebox
  • 4.2.3. AM335x Boards
• 4.3. Broadcom BCM2835
  • 4.3.1. Raspberry Pi
• Cirrus Logic edb9xxx
  • 1. Cirrus Logic EP9301
  • 2. Cirrus Logic EDB9302
  • 3. Cirrus Logic EDB9302A
  • 4. Cirrus Logic EDB9307
  • 5. Cirrus Logic EDB9307A
  • 6. Cirrus Logic EDB9312
  • 7. Cirrus Logic EDB9315
  • 8. Cirrus Logic EDB9315A
• 4.4. TI Davinci
  • 4.4.1. virt2real
• 4.5. Canon DIGIC
  • 4.5.1. Canon PowerShot A1100 IS
• 4.6. barebox on (U)EFI
  • 4.6.1. Building barebox for EFI
  • 4.6.2. Running barebox on EFI systems
  • 4.6.3. Loading EFI applications
  • 4.6.4. Simple Network Protocol (SNP)
  • 4.6.5. EFI File IO Interface
  • 4.6.6. Block IO Protocol
  • 4.6.7. EFI device paths
  • 4.6.8. EFI variables
  • 4.6.9. EFI driver model and barebox
  • 4.6.10. Building EDK2
• 4.7. Garz & Fricke based boards
  • 4.7.1. Santaro (i.MX6)
• 4.8. iBASE MI991AF
  • 4.8.1. Running barebox
  • 4.8.2. Links
• 4.9. Freescale i.MX
  • 4.9.1. Internal Boot Mode
  • 4.9.2. Internal Boot Mode Through Internal RAM(IRAM)
  • 4.9.3. External Boot Mode
  • 4.9.4. i.MX boards
• 4.10. MIPS
  • 4.10.1. D-Link DIR-320
  • 4.10.2. MIPS Creator CI20
  • 4.10.3. Loongson LS1B
  • 4.10.4. QEMU Malta
  • 4.10.5. Ritmix RZX-50
  • 4.10.6. TP-LINK MR3020
• 4.11. Marvell Embedded Business Unit (mvebu)
  • 4.11.1. Move of the Register Window
  • 4.11.2. RAM initialisation
  • 4.11.3. Booting second stage
  • 4.11.4. Booting from UART
  • 4.11.5. mvebu boards
• 4.12. Freescale MXS
  • 4.12.1. Bootlets
  • 4.12.2. Booting Freescale i.MXs
  • 4.12.3. Booting from USB
  • 4.12.4. Booting from SD cards
  • 4.12.5. Booting second stage
  • 4.12.6. MXS boards
• 4.13. Texas Instruments OMAP
  • 4.13.1. Bootstrapping a PandaBoard
  • 4.13.2. Networking
• 4.14. OpenRISC
  • 4.14.1. or1ksim
• 4.15. PowerPC boards
  • 4.15.1. Phytec phyCORE-MPC5200-Tiny
• 4.16. PXA boards
  • 4.16.1. Phytec phyCORE-PXA270
• 4.17. Rockchip RK3288
  • 4.17.1. Building barebox
  • 4.17.2. Starting and updating barebox
  • 4.17.3. RK3288 Boards
• 4.18. Rockchip RK3188
  • 4.18.1. Radxa Rock
• 4.19. Samsung S3C/S5P
  • 4.19.1. DIGI a9m2440
• 4.20. Sandbox
  • 4.20.1. Building barebox for simulation
  • 4.20.2. Running the sandbox
• 4.21. Altera SoCFPGA
  • 4.21.1. Bootstrapping
  • 4.21.2. Updating handoff files
  • 4.21.3. Integrating new SDRAM driver
• 4.22. Nvidia Tegra
  • 4.22.1. Building
  • 4.22.2. Kickstarting a board using USB
  • 4.22.3. Writing barebox to the primary boot device
• 4.23. UEMD
  • 4.23.1. MB 77.07
• 4.24. x86
  • 4.24.1. Features
  • 4.24.2. Restrictions
  • 4.24.3. Boot Preparations
  • 4.24.4. Keep Sectors free