4.2. TI Davinci

4.2.1. virt2real

virt2real is a miniature board for creation of WiFi or Internet controllable smart devices.

The board has

• TI DaVinchi DM365 running at 300 MHz;
• 128 MiB DDR2 SDRAM;
• 256 MiB NAND Flash Memory;
• 2 x UART serial interfaces;
• 1 x Ethernet interface (Micrel KS8851);
• 1 x USB interface;
• microSD card slot.

The board uses U-Boot as bootloader.

4.2.1.1. Running barebox

1. Connect to the boards’s UART0 (115200 8N1); Use J2.2 (GND), J2.4 (UART0_TXD), J2.6 (UART0_RXD) pins.
2. Turn board’s power on;
3. Wait for Hit any key to stop autoboot prompt and press the space key.
4. Upload barebox.bin via Ymodem

5. Run barebox

4.2.1.2. Links

• http://virt2real.com/
• http://wiki.virt2real.ru/
• https://github.com/virt2real