2. Phytec phyCORE-i.MX31 CPU module PCM-037

2.1. The CPU module

http://www.phytec.eu/europe/products/modules-overview/phycore/produktdetails/p/phycore-imx31-2.html

This CPU card is based on a Freescale i.MX31 CPU. The card in configuration -0000REU is shipped with:

• 128 MiB synchronous dynamic RAM (DDR type)
• 64 MiB NAND flash
• 32 MiB NOR flash
• 512 kiB SRAM
• 4kiB EEPROM
• MMU, FPU
• Serial, Ethernet, USB (OTG), I2C, SPI, MMC/SD/SDIO, PCMCIA/CF, RTC

2.2. Supported baseboards

Supported baseboards are:

• Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001

2.3. How to get barebox for ‘Phytec’s phyCORE-i.MX31’

Using the default configuration:

make ARCH=arm pcm037_defconfig

Build the binary image:

make ARCH=arm CROSS_COMPILE=armv5compiler

NOTE: replace ‘’armv5compiler’’ with your ARM v5 cross compiler,

e.g.: ‘’arm-1136jfs-linux-gnueabi-‘’

The resulting binary image to be flashed will be barebox.bin, whereas the file named just barebox is an ELF executable for ARM.